Comfort System Central Control Module -J393-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Relay and Fuse Panel 3 -SR3- and move it to the side with the wires still connected. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
-- Remove the nuts -1-.
-- Remove the mount -2- at the same time guide out the body.
-- Release and disconnect the connectors -3 to 8-.
-- Release the retainers -arrows- and guide the Comfort System Central Control Module -J393- out of the mount.