Lower Tail Lamp, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• A damaged cover must be replaced.

• If the tail lamp was replaced, then the function for replacing the respective tail lamp must be performed.

Procedure

-- Connect the Vehicle Diagnostic Tester.

-- Select the Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-capable systems
• 0046 - Comfort System Central Control Module - J393
• 0046 - Comfort System Central Control Module, Functions
• Tail Lamp, Replacing

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.