Left And Right Headlamp Beam Adjustment Motor -V48- / -V49-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the adjusting axle ball head into the lamp unit ball socket in the headlamp from above, to do so push the lamp unit toward the rear.
-- The adjusting axle ball head must engage securely in the ball head mount.
-- Install the new height adjusting screw.
-- Close the housing cover and tighten the bolts.
-- Install the headlamp power output module. Refer to RIGHT AND LEFT LED HEADLAMP POWER OUTPUT MODULE 1 -A27- / -A31-, REMOVING AND INSTALLING .
-- Adjust the headlamp. Refer to HEADLAMP, ADJUSTING .