Loading Sill Lowering and Trailer Hitch Control Head -EX52-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Using a narrow screwdriver at the opening -arrow A- to release the cap, and at the same time, push slightly upward at the bottom -direction of arrow B-.
-- Remove the cap.
-- Remove the bolt -2-.
-- Pivot out the button trim -1- from the mount -direction of arrow C-.
-- Release and disconnect the connectors.
-- Release the retainers -arrows-.
-- Remove the controls -2- from the trim -1-.