Garage Door Opener Control Head -E284-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .
-- Remove the Anti-Theft Alarm System Sensor -G578-, if equipped. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
-- Carefully push the catches to the side -arrows-.
-- Remove the control head -2- from the front interior lamp/reading lamp -1-.