Driver And Front Passenger Seat Memory Settings Control Head -E464- / -E465-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the decorative trim. Refer to DECORATIVE TRIM, REMOVING AND INSTALLING .
-- Push the tab -3- slightly to the rear and remove the control head -1- from the mount at the same time in the -direction of the arrow-.
-- Release and disconnect the connector -2-.
-- Remove the control head.