Rear Cigarette Lighter -U9- /12 V Socket 2 -U18-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the blind cover.

-- The release tabs -2- on the Cigarette Lighter Release Tool:T40148 must engage in the openings on the cigarette lighter -3- -arrow-. To do so, the threaded rod -1- must be slid all the way down.

Fig 1: 12 V Socket 5 -U26-

Courtesy of AUDI

-- Slide the cigarette lighter release tool -3- all the way into the cigarette lighter -1-.

Courtesy of AUDI

-- Turn the thumbwheel -2- at the Cigarette Lighter Release Tool:T40148 clockwise all the way to the end stop.

The plunger -2- is pulled up and the release tabs -1- are spreading in the Cigarette Lighter Release Tool:T40148 -arrows-.

Fig 2: Identifying Release Tool T40148 In Use
Courtesy of AUDI

-- Remove the cigarette lighter from the illumination ring with the Socket Illumination Bulb -L42- using the cigarette lighter release tool.

-- Guide the wire out through the mount.