LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Air Conditioning (Ac Compressor - Display Control Head)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING >> Installing

Fresh Air Blower -V2- WITH Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Check the air intake manifold -C- via the shaft for the Fresh Air Blower -V2- -B- for contamination and clean if necessary.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake manifold -C-.