Vehicle Interior Forced Air Extraction, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Check the seal on the vent frame -A- for damage.
-- Install the vent frame -A- on the proper side so that the sealing lips -B- close correctly.
-- Push in the vent frame of the forced air extraction -A- until it clicks into place and push all tabs -C- in the opening in the body -D-.