Preliminary Work For Replacing Belt Pulley

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the ribbed belt (for power take-off) -C- from the A/C compressor belt pulley. Refer to RIBBED BELT, REMOVING AND INSTALLING - DMSA or RIBBED BELT, REMOVING AND INSTALLING - DPVA or RIBBED BELT, REMOVING AND INSTALLING - EA839 .

Courtesy of AUDI OF AMERICA, LLC

-- If necessary, remove the A/C compressor from the bracket and tilt the front downward.

Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET, VEHICLES WITH 4-CYLINDER ENGINE
Refer to A/C COMPRESSOR, REMOVING AND INSTALLING AT BRACKET, VEHICLES WITH 6-CYLINDER ENGINE (EXCEPT 6-CYLINDER 2.9L TFSI ENGINE)