LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Wheels, Tires, Wheel Alignment (Wheel Tire Guide - Temporary Spares)) >> 44 Wheels, Tires, Wheel Alignment >> Tire Wear >> Permitted Differences In Tread Depth >> Models With Vertically Installed Engine

Models With Vertically Installed Engine

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Tread depth difference on models with vertically installed engine, such as A4, A5, A6, A7, A8, Q5, Q7...

Here the average difference between the front and rear axle must not be greater than 2 mm.

Average at front axle 3.0 mm

Average at rear axle 4.5 mm

Difference of front axle to rear axle 1.5 mm

Within the permissible tolerance of 2 mm.

scientia non olet · About LEMON Manuals