Metal Valve, Removing And Installing, Version 1: Installing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Clean the valve hole.

-- Insert the metal valve into the valve hole, attach the washer and tighten the union nut to tightening specification.

-- Secure the valve using the 2 mm pin against turning.

Fig 1: Securing Against Turning With Counter Hold

Courtesy of AUDI

-- Install the tire pressure monitoring sensor.