LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Passenger Protection) >> 69 Passenger Protection >> Seat Belts >> Rear Seat Belt Guide, Removing And Installing >> Outer Rear Seat Belt Guide, Removing And Installing >> Removing

Outer Rear Seat Belt Guide, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA69-11553Courtesy of AUDI

-- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .

-- Remove the outer rear three-point seat belt. Refer to OUTER REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING .

-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- If equipped, remove the side window damper from the seat belt guide -4-.

-- Release and disconnect the connector -2-.

-- Remove the bolts -1 and 3-.

-- Remove the seat belt guide -4-.