Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI
|
-- Move the front passenger all the way back to the highest position.
-- Release and disconnect the passenger occupant detection sensor connector -2-.
-- Unclip the mount -arrows- from the seat pan.
-- Remove the passenger occupant detection sensor -1- by pressing the seat cushion slightly upward.