Upper Steering Column Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Position the steering wheel as far back and down as possible.
-- Pry off the gap cover -1- with the scraper -A- in the direction of -arrow-.
-- Turn the steering wheel counter-clockwise 90° from the straight position.
-- Pry the upper steering column trim panel -1- with scraper no. 1 from the Scraper Set Scraper Set:VAS 6845 carefully off the lower steering column trim panel in the direction of -arrow A-.
-- Turn the steering wheel back 180° and repeat the procedure on the opposite side in direction of -arrow B-.
-- Disengage the upper steering column trim panel -1- from the lower steering column trim panel and remove.