Lower Steering Column Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Detach the upper steering column trim panel. Refer to UPPER STEERING COLUMN TRIM PANEL, REMOVING AND INSTALLING .
-- Turn the steering wheel counter-clockwise 90° from the straight position.
-- Remove the screw -arrow A-.
-- Turn steering wheel back 180° and remove screw -arrow B- on the opposite side.
-- Remove the bolt -arrow C- and remove the lower steering column trim panel -1-.
-- Disengage the cable holder on the steering column trim panel.
-- If equipped, release and disconnect the connectors.