Glove Compartment, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
Versions with Front Passenger Airbag Deactivation Key Switch -E224- :
-- Press the connector together until it engages audibly.
- If the Airbag Indicator Lamp -K75- indicates a fault after installing, check the DTC memory, erase it and check it again using the Vehicle Diagnostic Tester.
Continuation for All Vehicles
- Before installing, check all the fasteners for damage and replace if necessary.
- Make sure the connectors are pushed in all the way and that they engage audibly.
- Make sure the wires are not pinched.