Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment lid.
-- Release the hooks for the glove compartment handle in direction of -arrow A- through the opening on the side of the glove compartment lid with a small screwdriver -1- (approximately 80 mm long) or Torx screwdriver T10 (approximately 80 mm long).
-- At the same time, unclip the glove compartment handle -3- carefully with the Pry Lever -2- in direction of -arrow B-.
-- Press the glove compartment handle and release retaining the hook -1- at the side of the glove compartment opener using a screwdriver.
-- Pry the glove compartment handle -2- carefully off the glove compartment lid direction of -arrow- with the Pry Lever:80-200 .