Overview - Luggage Compartment Roll Cover

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Luggage Compartment Roll Cover

Courtesy of AUDI

Bolt
- 3.5 Nm
Roll Cover Guide Rail
- Installed depending on vehicle equipment
- Refer to Luggage Compartment Cover Drive Unit -VX68-, REMOVING AND INSTALLING
Bolt
- 3.5 Nm
Bolt
- 8 Nm
Left Bracket
- Under the luggage compartment side trim panel
- Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING
Rivet
- Quantity: 3
Luggage Compartment Roll Cover
Nut
- 3.5 Nm
- Quantity: 2
Right Bracket
- Under the luggage compartment side trim panel
- Refer to ROLL COVER BRACKET, REMOVING AND INSTALLING
Frame
- For luggage compartment roll cover handle
- Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING
Handle
- For luggage compartment roll cover
- Refer to LUGGAGE COMPARTMENT ROLL COVER HANDLE, REMOVING AND INSTALLING
Bolt
- 0.35 Nm
- Quantity: 2
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads, then tighten the bolt to the tightening specification
Rivet
Locking Pin
- Riveted with roll cover
Roll Cover Catch
- Clipped into the guide rails
- Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING
Nut
- 3.5 Nm
Nut
- 3.5 Nm
- Quantity: 2
Luggage Compartment Cover Drive Unit -VX68-
- Installed depending on vehicle equipment
- Refer to Luggage Compartment Cover Drive Unit -VX68-, REMOVING AND INSTALLING