Rear Center Console Vent, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI

-- Open the vent -1-.

-- Carefully guide the Hook Tool -A- between the slats and engage behind the vent -1-.

-- Alternating between both sides, carefully remove the vent from the installation opening in the direction of -arrow-.

-- Release and disconnect the connector.