Center Console Rear Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seats all the way forward.
-- Unclip the front of the cover -1- with scraper no. 7 from the Scraper Set Scraper Set:VAS 6845 in the direction of -arrow- and remove backwards.
-- Remove the rear vent in the center console. Refer to REAR CENTER CONSOLE VENT, REMOVING AND INSTALLING .
-- Remove the bolts -2-.
-- Unclip the trim -1- at the sides starting at the top from the center console in the direction of -arrow-.
-- During this, loosen the inner locking mechanisms -3- on the right and left side.
-- Remove the trim -1- from the center console toward the rear.
-- Release and disconnect the connectors.