LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Interior Equipment) >> 68 Interior Equipment >> Center Console >> Center Console Cover, Removing And Installing >> Removing

Center Console Cover, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA96-11752Courtesy of AUDI

-- Remove the center console rear trim. Refer to CENTER CONSOLE REAR TRIM, REMOVING AND INSTALLING .

-- Remove the front center armrest. Refer to FRONT CENTER ARMREST, REMOVING AND INSTALLING .

-- Remove the center console upper decorative trim. Refer to Upper Decorative Trim, Removing .

-- Push the Selector Lever Transmission Range Display -Y5- -1- toward the rear in the direction of -arrow-.

-- Remove the selector lever transmission range display -1- upward while releasing and disconnecting the connector.

-- Remove the storage compartment insert. Refer to -item 12-  Center Console Upper Section.

CAUTION:

Different bolts are installed.

- Mark the component location or take pictures.

-- Remove the bolts -arrows-.

GWWA68-11170Courtesy of AUDI

-- Loosen the center console cover -1- from the rear catches in direction of -arrow A-.

GWWA68-11168Courtesy of AUDI

-- Loosen the center console cover -1- from the front catches in direction of -arrow B-.

-- Lift the center console cover slightly and release and disconnect the connectors.