Vacuum Pump, Removing And Installing, Vehicle With 4.0L TFSI Engine: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Check the vacuum line/hose for damage before assembling and replace if necessary.
-- Position the vacuum pump driver -1- so it engages in the symmetrical groove on the camshaft when positioning -arrows- (example illustration).
-- Install the fan shroud. Refer to RADIATOR/RADIATOR FAN .