Vacuum Pump, Removing And Installing, 2.0L TFSI Engine: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1-, remove the vacuum hose and do not damage it while doing so.
-- Remove the bolts -arrows-.
-- Pull the vacuum pump out of the mount and remove.