Overview - Vacuum Pump, 2.0L TFSI Engine
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING .
- Seal
- Always replace after removing
- Vacuum Hose
- Bolt
- 8 Nm +180°
- Always replace after removing
- Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Bolt
- Tightening specification. Refer to OVERVIEW - HIGH PRESSURE PUMP .
- High Pressure Pump
- Removing and Installing. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .
- O-Ring
- Always replace after removing