LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Brake System - Hydraulic Components (4M)) >> 47 Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve With Vacuum Line In Engine Compartment, Removing And Installing, 4.0L TFSI Engine >> Removing

Check Valve With Vacuum Line In Engine Compartment, Removing And Installing, 4.0L TFSI Engine: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Release the retainer in direction of -arrow- and remove the vacuum line from the vacuum pump.

GWWA47-10312Courtesy of AUDI OF AMERICA, LLC

-- Carefully detach the vacuum line from the plenum chamber bulkhead, free up and remove (example illustration).