Brake Booster Pressure Sensor, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -1- for the Vacuum Sensor -G608-.
-- Release the retainers in direction of -arrows- and carefully remove the Vacuum Sensor -G608- -2-.