Fuel Tank Leak Detection Module -GX36-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right rear wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Release and disconnect the connector -2-.
-- Remove the bolts -arrows-.
-- Remove the Fuel Tank Leak Detection Module -GX36- -3- with hose -4- and bracket -1-.
-- Loosen the hose clamp -6- and remove the vent hose -4- from the filter -5-.
-- Remove the bolt -4-.
-- Remove the bolts -arrows- and remove the bracket -1-.
-- Loosen the hose clamp -2- and remove the vent hose -3-.
-- Remove the hose -2- from the Fuel Tank Leak Detection Module -GX36- -1- -arrow A-.
-- Push the releases together for this -B arrows-.