LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 (Fuel Supply (Fuel Supply - Gasoline Engines)) >> 20 Fuel Supply >> EVAP System >> EVAP Canister, Removing And Installing >> Fuel Tank Leak Detection Control Module -J909-, REMOVING AND INSTALLING, AUDI Q7 >> Removing

Fuel Tank Leak Detection Control Module -J909-, REMOVING AND INSTALLING, AUDI Q7: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA20-11039Courtesy of AUDI

-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .

-- Remove the right rear underbody trim panel. Refer to UNDERBODY TRIM PANEL .

-- Release and disconnect the connector -1-.

-- Remove the nuts -arrows- and remove the control module -2-.