Relay and Fuse Panel 4 -SR4-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the right front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Push the carpet in the area of the footwell to the side as far as possible.
-- Release the catch -5- and open the cover -4- in the direction of -arrow-.
-- Remove the nuts -1, 2 and 3- and free up the wires.
-- Remove the relay -2- from the mount -1- by opening the clip in the direction of -arrow-.
-- Release the retainer in the direction of -arrow- and remove the wire junction -1-.
-- Release the clips in the direction of -arrows- and press the relay panel -2- back and out of the bracket -1-.