Main Fuse Panel On Battery, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to Battery -A-, DISCONNECTING AND CONNECTING, 0K0 AND 0K3 .
-- Open the cover -1- over the battery positive terminal.
-- Loosen the nut -2- several turns and remove the battery positive cable terminal clamp -3- from the battery terminal.
-- Release the retainer -5- and open the flap -4- over the main fuse panel in the direction of -arrow-.
-- Disconnect the wires -1 through 6-.
-- Release the retainer -4- and open the flap -3- in the direction of -arrow-.
-- Disconnect the connector -1- from the cut-off relay -2-.
-- Remove the main fuse panel.