LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Wiring) >> 97 Wiring >> Relay Panels, Fuse Panels And E-Boxes >> Relay And Fuse Panels Inside Luggage Compartment On Left Side, Removing And Installing >> Left Luggage Compartment Fuse Panel, Removing And Installing >> Removing

Left Luggage Compartment Fuse Panel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Releasing Clips And Removing Cover From Fuse Holder
GWWA97-10014Courtesy of AUDI

-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to Battery -A-, DISCONNECTING AND CONNECTING, 0K0 AND 0K3 .

-- Remove the Relay and Fuse Panel 2 -SR2-. The relay mount remains clipped in. Refer to Relay and Fuse Panel 2 -SR2-, REMOVING AND INSTALLING .

-- Unlock the release and remove it from the fuse panel.

-- Remove the fuses from the fuse panel.

-- Open the clips in the direction of -arrows- and remove the fuse panel cover.

-- Pull off retaining strip -1- for the connectors in the direction of -arrow- and remove the connectors from the plug-in socket

Fig 2: Pulling Off Retaining Strip
GWWA97-10015Courtesy of AUDI