LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Wiring) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Removing

Garage Door Opener Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
GWWA97-13041Courtesy of AUDI

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Release the catches -4-.

-- Remove the control module -3- from the mount -2-.