Line Routing And Securing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- To prevent interchanging lines and ensure the original routing is followed, mark the individual lines, such as fuel, hydraulic, vacuum, and EVAP system lines as well as wires before removing them. Draw sketches or take pictures of them if needed.
- Due to the limited space inside the engine compartment, allow sufficient clearance to all moving or hot parts to avoid damaging the lines.
- Check the routing after securing refrigerant lines. They must be inserted in their brackets and must not come into contact with other components.