HEATER AND A/C UNIT IDENTIFICATION, MAHLE "Version 2"
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
At the start of production for this vehicle, only the heater and A/C units manufactured by "Mahle" "version 1" were installed. Other versions of heater and A/C units from the same or other manufacturers can also be installed later on this vehicle (for example, "Mahle" "version 2", introduction TBD).
- The manufacturer sticker -1- is visible after removing the Front A/C Display Control Head -E87- or Front Information Display Control Head 2 -J1060- through an opening in the instrument panel on the heater and A/C unit -2-. Refer to DISPLAY CONTROL HEAD, REMOVING AND INSTALLING .
- Adjustment motors -3- with closed shaft -4- on the heater and A/C unit.