LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Removing And Installing >> Installing >> Depending on the version, the following additional work procedures are required

Depending on the version, the following additional work procedures are required

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Calibrate the Rearview Camera -R189-. Refer to REARVIEW CAMERA SYSTEM, CALIBRATING .

-- Calibrate the Rear Peripheral Camera -R246-. Refer to PERIPHERAL CAMERA, CALIBRATING .

Tightening Specifications