Rear Lid Seal, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Position the rear lid seal -3- on the body flange.
 Courtesy of AUDI
|
- The rear lid seal butt joint -1- must point to the striker -2-.
-- Press on the entire length of the rear lid seal.