Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Do not hold the rear lid drive unit on the cable when installing.
The rear lid being completed must be guided by hand, since the rear lid drive unit can destroy the rear lid when the weight is too low.
The ball sockets on the rear lid drive unit must not strike the ball pins, but rather they must be placed at an angle and be pressed on with a rotational movement.

-- Perform an adaptation. Refer to Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, PROGRAMMING .