Rear Lid Control Module -J605-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Comfort System Central Control Module -J393- and tilt to the side with the wires connected. Refer to Comfort System Central Control Module -J393-, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2-.
-- Release the retaining tab -3- on the bracket -4-.
-- Remove the Rear Lid Control Module -J605- -1- in the -direction of the arrow- from the bracket -4-.