Latch Release Lever Release Cable, Removing And Installing, LHD: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Engage the release cable nipple -3- in the coupling roller -2-.
-- Push the release cable -3- into the cable bracket.
-- Position the housing cover -1- so that the printed arrow points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.
-- A function test must be performed on the hood before it is closed.