Coupling With Left And Right Latch Release Cables, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing:
- Vehicles with diesel engine. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING
- Vehicles with gasoline engine. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING
-- Remove the latch and disengage the release cable for the latch release lever. Refer to LATCH, REMOVING AND INSTALLING .
-- Release the retainers -arrows- and remove the housing cover -1-.
-- Loosen the release cable -4- from the cable bracket -3- and disengage the release cable nipple -2-.
-- Release the catches and remove the coupling from the lock carrier.
-- Free up the release cables and guide them out of the lock carrier.