Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING, VEHICLES WITH 48V SYSTEM: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Terminal 30a Wire Junction -TV3- and move it to the side with the wires still connected. Refer to Terminal 30a Wire Junction -TV3-, REMOVING AND INSTALLING .
-- Remove the terminal 40 wire junction and move it to the side with the wires still connected. Refer to Terminal 40 Wire Junction -TV66-, REMOVING AND INSTALLING .
-- Disconnect the connector -5-.
-- Remove the nuts -2 and 3- and free up the wires -1 and 6-.
-- Remove the nuts -arrows-.
-- Remove the wire junction -4- from the threaded pins.