Component Location Overview - Terminal 30 Wire Junction -TV2- and Terminal 30a Wire Junction -TV3-
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Relay and Fuse Panel 1 -SR1-
- Relay and Fuse Panel 1 -SR1-
- Nut
- 3 Nm
- Mount
- For relay and fuse panel
- Nut
- 20 Nm
- Nut
- 20 Nm
- Positive Cable
- From the Battery -A-
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Nut
- 9 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Terminal 30a Wire Junction -TV3-
- Removing and installing. Refer to Terminal 30a Wire Junction -TV3-, REMOVING AND INSTALLING .
- Nut
- 7.5 Nm
- Cap
- Suppressor -C24-
- Removing and installing. Refer to Suppressor -C24-, REMOVING AND INSTALLING .
- Terminal 30 Wire Junction -TV2-
- Removing and installing. Refer to Terminal 30 Wire Junction -TV2-, REMOVING AND INSTALLING .
- Nut
- Quantity: 3
- 3 Nm
- Positive Cable
- To starter, generator