LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Wiring) >> 97 Wiring >> Control Modules >> Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING >> Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING >> Removing

Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
GWWA97-11895Courtesy of AUDI

-- Remove the vehicle electrical system control module. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .

-- Free up the wiring harness -4-.

-- Pry out the cover -2-.

-- Release the catch -1- and push the mount -5- upward until the guides -3- are disengaged.

-- Remove the mount downward.