Mobile Device Charger 1 -J1146-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the Cellular Telephone -R54-.
The Mobile Device Charger 1 -J1146- -1- is clipped into the storage compartment.
The rubber lip on the surface on which the Removal Tool for Coupling - Aerial:T40388 was inserted must be slightly pressed out.
-- Push the rubber lip using the Removal Tool for Coupling - Aerial:T40388 -A- carefully to the side and guide in the Removal Tool for Coupling - Aerial:T40388 vertically from above.
-- The catch -2- is released and engages in the groove on the Removal Tool for Coupling - Aerial:T40388 -A-.
-- Pull the Removal Tool for Coupling - Aerial:T40388 -A- vertically upward and remove the Mobile Device Charger 1 -J1146- -1-.
-- The Mobile Device Charger 1 -J1146- is clipped in on the opposite side. Pivot the Mobile Device Charger 1 -J1146- -1- out of the storage compartment.
-- Disconnect the connectors.