Left Rear Information Display Control Head Control Module -J648- /Right Rear Information Display Control Head Control Module -J649-, REMOVING AND INSTALLING: Removing
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the backrest cover and cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Carefully push the Left Rear Information Display Control Head Control Module -J648- -1- in the direction of the -arrow A- from the upper eye on the backrest frame.
-- Then pull the Left Rear Information Display Control Head Control Module -J648- -1- in the direction of -arrow B- from the lower eye on the backrest frame.
-- Release and disconnect the connector -2- from the Left Rear Information Display Control Head Control Module -J648- -1-.
-- Unclip the wires from the Left Rear Information Display Control Head Control Module -J648- -1-.
-- Remove the Left Rear Information Display Control Head Control Module -J648- -1-.