Calibration Device:VAS721001, INSTALLING AND ALIGNING: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
After performing service work on the vehicle, it may be necessary to calibrate the peripheral camera system. In detail, this is the case after:
- The installation position of a camera in the vehicle changed.
- The Peripheral Camera Control Module -J928- was replaced.
- There is a misalignment in the overlap range of the individual camera images.