Fender, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front fender cover. Refer to FENDER FRONT COVER, REMOVING AND INSTALLING .
-- Remove the rear cover for the fender. Refer to FENDER FRONT COVER, REMOVING AND INSTALLING .
-- Remove the wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove the end plate. Refer to END PANEL, REMOVING AND INSTALLING .
-- If required, remove the washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
-- Remove the bolts -2- and double bolts -3- from the fender -1-.
-- If equipped, remove the fender damper.
-- Remove the bolt -2- near the upper hinge.
-- Remove the bolts -3-.
-- Remove the fender -1-.