Plenum Chamber Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
-- Open the cap -6- for the filler neck.
-- Remove the seal -1-.
-- Coat the transition between the windshield -2- and the plenum chamber cover -5- with soapy water.
-- Starting at the glass edge, carefully remove the plenum chamber cover from the windshield retainer by lifting it vertically upward.
-- Remove the plenum chamber cover -5- by carefully removing the plenum chamber cover tab -4- in the -direction of the arrow- from the windshield mount -3-.