Overview - Bulkhead
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- Lower, right side
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE LOWER COVER, REMOVING AND INSTALLING, RIGHT SIDE .
- Nut
- Quantity: 3
- 3 Nm
- Cover
- Upper, right side
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE UPPER COVER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 4
- 10 Nm
- Plenum Chamber Bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
- Cover
- Upper, left side
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE UPPER COVER, REMOVING AND INSTALLING .
- Cover
- Lower, left side
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE LOWER COVER, REMOVING AND INSTALLING, LEFT SIDE .
- Bolt
- Quantity: 2
- 10 Nm
- Grommet
- For the brake booster vacuum line
- Seal
- For the plenum chamber bulkhead
- Heat Shield
- Upper
- For the plenum chamber bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Heat Shield
- Lower
- For the plenum chamber bulkhead
- Removing and Installing. Refer to LOWER PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
- Clamping Washers
- Quantity: 4
- Clamping Washers
- Quantity: 4
- Grommet
- for coolant lines
- Plenum Chamber End Plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE, REMOVING AND INSTALLING .